Quality of Steam-Treated Bayur (Pterospermum javanicum) and Udu (Litsea accedontoides) Wood
Authors
Dini Lestari , Fauzan FahrussiamDOI:
10.29303/jbt.v24i2.6949Published:
2024-06-25Issue:
Vol. 24 No. 2 (2024): April - JuniKeywords:
Bayur wood; Mechanical properties; Physical properties; Steam treatment; Udu woodArticles
Downloads
How to Cite
Downloads
Metrics
Abstract
Steam treatment is one of the thermall modification methods that used to improve the quality of wood, especially wood properties related to the presence of water. This study aims to evaluate quality of 2 types of trade wood in the West Nusa Tenggara region, namely bayur wood (Pterospermum javanicum) and udu (Litsea accedontoides) after steam treatment. Steam treatment was carried out at 126 ◦C for 1 hour using an autoclap device. The parameters tested included the physical properties of wood consisting of density, moisture content, volumetric swelling and Anti Swelling Efficiency (ASE). The mechanical properties of wood tested included Modulus of elasticity (MOE) and Modulus of Rupture (MOR). The results showed that steam treatment did not change the density but reduction in moisture content of bayur and udu wood. Based on the Anti Swelling Efficiency value, steam treatment effectively increased the dimensional stability of udu wood with a value of 88.81%. For mechanical property parameters, steam treatment graphically increased the MOE and MOR values of bayur and udu wood. However, according to SNI 03-3527-1194 there was no increase in the strength class of the two types of wood, and both types of wood were included in strength class III.
References
Anna, N., Siregar, I. Z., Supriyanto, Sudrajat, D. J., & Karlinasari, L. (2023). Physical, Mechanical, and Anatomical Properties of 12 Jabon (Neolamarckia cadamba) Provenances Wood in Indonesia. Biodiversitas 24(11): 5895–5904. DOI: 10.13057/biodiv/d241107
Borůvka, V., Dudík, R., Zeidler, A., & Holeček, T. (2019). Influence of Site Conditions and Quality of Birch Wood on Its Properties and Utilization After Heat Treatment. Forests 10(2). DOI: 10.3390/f10020189
Fatrawana, A., Maulana, S., Nawawi, D. S., Sari, R. K., Hidayat, W., Park, S. H., Febrianto, F., Lee, S. H., & Kim, N. H. (2019). Changes in Chemical Components of Steam-Treated Betung Bamboo Strands and Their Effects on the Physical and Mechanical Properties of Bamboo-Oriented Strand Boards. European Journal of Wood and Wood Products Springer Verlag 77(5): 731–739. DOI: 10.1007/s00107-019-01426-7
Fernandes, A. (2014). Stabilisasi Dimensi Kayu Shorea retusa Meijer Dengan Poly Vinil Acetate (PVAc). Jurnal Penelitian Dipterokarpa 8(1): 1–6. DOI: 10.20886/jped.2014.8.1.1-6
Guo, J., Yin, J., Zhang, Y., Salmén, L., & Yin, Y. (2017). Effects of Thermo-Hygro-Nechanical (THM) Treatment on the Viscoelasticity of In-situ Lignin. Holzforschung 71(6): 455–460. DOI: 10.1515/hf-2016-0201
Hidayat, W., & Febrianto, F. (2018). Teknologi Modifikasi Kayu Ramah Lingkungan: Modifikasi Panas dan Pengaruhnya Terhadap Sifat-Sifat Kayu.
Kučerová, V., Lagaňa, R., Výbohová, E., & Hýrošová, T. (2016). The Effect of Chemical Changes during Heat Treatment on the Color and Mechanical Properties of Fir Wood. BioResources 11(4): 9079–9094. DOI: 10.15376/BIORES.11.4.9079-9094
Lestari, D., Ningsih, R. V., Shabrina, H., & Fahrussiam, F. (2023). Physical and Mechanical Properties of Thermally Modified Kenanga (Cananga ordorata) and Sengon (Paraserianthes falcataria) Wood. Agroteksos 33(3): 998–1005. DOI: 10.1007/978-3-031-16388-3_6
Lestari, D., Suwanda, A. A., Murda, R. A., Maulana, M. I., Augustina, S., Rianjanu, A., Taher, T., Hidayat, W., Maulana, S., & Lubis, M. A. R. (2024). Durability to Natural Weathering of Methylene Diphenyl Diisocyanate-Bonded Bamboo Oriented Strand Board. Jurnal Sylva Lestari 12(1): 143–157. DOI: 10.23960/jsl.v12i1.839
Mardikanto, T., Karlinasari, L., & Bahtiar (2017). Sifat Mekanis Kayu. IPB Press, Bogor.
Martawijaya, A., Kertasujana, I., Mandang, Y., Prawira, S., & Kadir, K. (2005). Atlas Kayu Indonesia Jilid II. Badan Penelitian dan Pengembangan, Departement Kehutanan RI, Bogor.
Maulana, S., Busyra, I., Fatrawana, A., Hidayat, W., Sari, R. K., Sumardi, I., Wistara, I. N. J., Lee, S. H., Kim, N. H., & Febrianto, F. (2017). Effects of Steam Treatment on Physical and Mechanical Properties of Bamboo Oriented Strand Board. Journal of the Korean Wood Science and Technology 45 (6): 872 – 882. DOI: 10.5658/WOOD.2017.45.6.872
Maulana, S., Damanik, M. Q., Maulana, M. I., Fatrawana, A., Sumardi, I., Wistara, N. J., & Febrianto, F. (2019). Ketahanan Oriented Strand Board Bambu Betung dengan Perlakuan Steam pada Strand terhadap Cuaca. J. Ilmu Teknol. Kayu Tropis 17 (1): 34-46. DOI: http://dx.doi.org/10.29303
Rasdianah, D., Zaidon, A., Hidayah, A., & Lee, S. H. (2018). Effects of Superheated Steam Treatment on the Physical and Mechanical Properties of Light Red Meranti and Kedondong Wood. Journal of Tropical Forest Science 30(3): 384–392. DOI: 10.26525/jtfs2018.30.3.384392
Rodriguez, H. G., Maiti, R., Kumari, A., & Sarkar, N. C. (2016). Variability in Wood Density and Wood Fibre Characterization of Woody Species and Their Possible Utility in Northeastern Mexico. American Journal of Plant Sciences 07(07): 1139–1150. DOI: 10.4236/ajps.2016.77109
Sikora, A., Hájková, K., & Jurczyková, T. (2022). Degradation of Chemical Components of Thermally Modified Robinia pseudoacacia L. Wood and Its Effect on the Change in Mechanical Properties. International Journal of Molecular Sciences 23(24). DOI: 10.3390/ijms232415652
Silva, M. R. Da., Machado, G. D. O., Brito, J. O., & Junior, C. C. (2013). Strength and Stiffness of Thermally Rectified Eucalyptus Wood Under Compression. Materials Research 16(5): 1077–1083. DOI: 10.1590/S1516-14392013005000086
SNI 03-3257. 1994. SNI Mutu dan Ukuran Kayu Bangunan. Badan Standar Nasional Indonesia 1–10.
Thybring, E. E., & Fredriksson, M. (2021). Wood Modification as a Tool to Understand Moisture in Wood. Forests 12 (3): 1–19. DOI: 10.3390/f12030372
Uar, N., Wali, M., & Saleh, T. (2018). Sifat Fisis Kayu Marsegu (Nauclea orientalis L) dari Pulau Buru, Maluku Physical Properties of Marsegu Wood (Nauclea orientalis L). Jurnal Agrohut 9(2): 110–116. DOI:https://doi.org/10.51135/agh.v9i2.6
Wang, X., Chen, X., Xie, X., Wu, Y., Zhao, L., Li, Y., & Wang, S. (2018). Effects of Thermal Modification on the Physical, Chemical and Micromechanical Properties of Masson Pine Wood (Pinus massoniana Lamb.). Holzforschung 72 (12) : 1063–1070. DOI: 10.1515/hf-2017-0205
Wulandari, F.T., & Latifah. S. (2022). Karakteristik Sifat Fisika dan Mekanika Papan Laminasi Kayu Bayur (Pterospermum diversifolium) sebagai Bahan Subtitusi Papan Solid. Wahana Forostra : 17(2). DOI: 10.31849/forestra.v17i2.9362
License
Copyright (c) 2024 Dini Lestari, Fauzan Fahrussiam
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Biologi Tropis is licensed under a Creative Commons Attribution 4.0 International License.
The copyright of the received article shall be assigned to the author as the owner of the paper. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.
Authors are permitted to disseminate published articles by sharing the link/DOI of the article at the journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from the journal with an acknowledgment of initial publication to this journal.