Vol. 11 No. 1 (2025): January-June
Open Access
Peer Reviewed

Design And Performance Analysis of a Solar-Powered Boost Converter with Inductor Variations Controlled by Arduino Uno

Authors

Muhammad Paraj Azhar Hardian , Ferdyanto Ferdyanto , Gumilang Fatwa , Augusta Erlangga

DOI:

10.29303/jpft.v11i1.7842

Published:

2025-03-23

Downloads

Abstract

This research designs and makes an analysis of the performance of a solar panel-based DC-DC boost converter topology using an Arduino Uno microcontroller. Boost converter is given a variation of inductor wire with 30 turns and 60 turns using a diameter of 1 . This research was conducted to obtain the highest characteristics and efficiency of the performance of the boost converter that has been designed and made for each inductor wire turn variation. In this research, data analysis will be carried out, namely the effect of duty cycle on voltage and current, and how the effect of variations in the number of inductors turns on the efficiency of the boost converter. This circuit uses an arduino uno microcontroller to generate and control the duty cycle on pulse width modulation (PWM) to regulate and increase the desired output voltage. The inductor on the DC-DC boost converter with a wire variation of 60 turns at a diameter of 1  gets the highest efficiency with an average efficiency of 67.13 , while the inductor wire with 30 turns gets an average efficiency of 66.32 .  The maximum voltage generated by the solar panel used as the main source of electrical energy in the boost converter is 20.0  and the control system that has been applied to the arduino uno microcontroller can control and generate a duty cycle with a ratio of 0  - 90 .  The boost converter circuit made gets low efficiency due to the presence of MOSFET components that work in non-ideal conditions, which causes excessive power losses.

Keywords:

boost converter pulse width modulation inductor winding variation efficiency

References

Alfaris, A., & Yuhendri, M. (2020). Sistem Kendali dan Monitoring Boost Converter Berbasis GUI (graphical user interface) Matlab Menggunakan Arduino. JTEIN: Jurnal Teknik Elektro Indonesia, 1 (2), 266–272. From https://doi.org/10.24036/jtein.v1i2.83 DOI: https://doi.org/10.24036/jtein.v1i2.83

Allehyani, A. (2022). Analysis of a symmetrical multilevel DC-DC boost converter with ripple reduction structure for solar PV systems. Alexandria Engineering Journal, 61 (9), 7055–7065. From https://doi.org/10.1016/j.aej.2021.12.049 DOI: https://doi.org/10.1016/j.aej.2021.12.049

Anshory, I., Jamaaluddin, J., Wisaksono, A., Sulistiyowati, I., Hindarto, Rintyarna, B. S., Fudholi, A., Rahman, Y. A., & Sopian, K. (2024). Optimization DC-DC boost converter of BLDC motor drive by solar panel using PID and firefly algorithm. Results in Engineering, 21(March 2023), 101727. From:https://doi.org/10.1016/j.rineng.2023.101727 DOI: https://doi.org/10.1016/j.rineng.2023.101727

Assyidiq, M. A., Winardi, B., & Andromeda, T. (2017). Perancangan Boost Converter Menggunakan Voltage Feedback Pada Panel Surya. Transient, 6 (3), 404. From https://doi.org/10.14710/transient.6.3.404-410 DOI: https://doi.org/10.14710/transient.6.3.404-410

Fitriani, E., & Fitri, N. (2022). Pengaruh Tegangan Panel Surya Terhadap Nilai Tegangan Induktor Sebagai Rekayasa Energi Alternatif. Jurnal Tekno, 19 (1), 49–59. From https://doi.org/10.33557/jtekno.v19i1.1619 DOI: https://doi.org/10.33557/jtekno.v19i1.1619

Gasparotto, J., & Da Boit Martinello, K. (2021). Coal as an energy source and its impacts on human health. Energy Geoscience, 2 (2), 113–120. From https://doi.org/10.1016/j.engeos.2020.07.003 DOI: https://doi.org/10.1016/j.engeos.2020.07.003

Giwangkara, J. (2021). The Urgency of Renewable Energy Transition in Indonesia. Problema Transisi Enegi Di Indonesia, 1–24.

Hauke, B. (2009). Basic Calculation of a Boost Converter’s Power Stage. Texas Instruments, Application Report November, November 2009, 1–9. From http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Basic+Calculation+of+a+Boost+Converter’s+Power+Stage#0

Koç, Y., Birbir, Y., & Bodur, H. (2022). Non-isolated high step-up DC/DC converters – An overview. Alexandria Engineering Journal, 61 (2), 1091–1132. From https://doi.org/10.1016/j.aej.2021.06.071 DOI: https://doi.org/10.1016/j.aej.2021.06.071

Lopez-Santos, J. C. M.-M. J. C. R.-C. O. (2020). IET Power Electronics - 2020 - Lopez‐Santos - Quadratic boost converter with low‐output‐voltage ripple.pdf (p. Vol. 13 Iss. 8, pp. 1605–1612). IET Power Electron © The Institution of Engineering and Technology. From DOI:10.1049/iet-pel.2019.0472 DOI: https://doi.org/10.1049/iet-pel.2019.0472

Marahatta, A., Rajbhandari, Y., Shrestha, A., Phuyal, S., Thapa, A., & Korba, P. (2022). Model predictive control of DC/DC boost converter with reinforcement learning. Heliyon, 8 (11), e11416. From https://doi.org/10.1016/j.heliyon.2022.e11416 DOI: https://doi.org/10.1016/j.heliyon.2022.e11416

Mustari, J. I. M. A. (2019). Kontrol Power Elektronik Dan Aplikasinya (M. Amirullah, SE. (ed.)). Media Nusa Creative (MNC Publishing).

Pauzi, G. A., Rahma, D., Suciyati, S. W., & Surtono, A. (2020). Rancang Bangun Prototipe Pengoptimal Charging Baterai pada Mobil Listrik dari Pembangkit Tenaga Surya dengan Menggunakan Sistem Boost Converter. Journal of Energy, Material, and Instrumentation Technology, 1 (2), 40–46. From https://doi.org/10.23960/jemit.v1i2.19 DOI: https://doi.org/10.23960/jemit.v1i2.19

Raj, A., & Praveen, R. P. (2022). Highly efficient DC-DC boost converter implemented with improved MPPT algorithm for utility level photovoltaic applications. Ain Shams Engineering Journal, 13 (3), 101617. From https://doi.org/10.1016/j.asej.2021.10.012 DOI: https://doi.org/10.1016/j.asej.2021.10.012

Shaw, P. (2019). Modelling and analysis of an analogue MPPT-based PV battery charging system utilising DC-DC boost converter. IET Renewable Power Generation, 13 (11), 1958–1967. From https://doi.org/10.1049/iet rpg.2018.6273 DOI: https://doi.org/10.1049/iet-rpg.2018.6273

Siswanto, B., Susita, L., Purwadi, A., & Sudjatmoko. (2015). Koil Rogowski. Konstruksi Dan Uji Fungsi Sistem Deteksi Berkas Elektron, 121–128.

Srija, D. K., Keerthi, T. S., Anusha, R., Chandana, B. H., & Peddapati, S. (2019). Performance analysis of non-isolated high step-up DC-DC converter topologies used in photovoltaic grid connected electric vehicle charging stations. 5th International Conference on Electrical Energy Systems, ICEES 2019, 1–6. From https://doi.org/10.1109/ICEES.2019.8719288 DOI: https://doi.org/10.1109/ICEES.2019.8719288

Vishwanatha, S., & Yogesh V. Hote. (2017). IET Circuits Devices Syst - 2017 - Siddhartha - Systematic circuit design and analysis of a non‐ideal DC DC pulse width.pdf (p. Vol. 12 Iss. 2, pp. 144–156). IET Circuits Devices Syst © The Institution of Engineering and Technology. From https://doi.org/10.1049/iet-cds.2017.0168 DOI: https://doi.org/10.1049/iet-cds.2017.0168

Author Biographies

Muhammad Paraj Azhar Hardian, Universitas Pembangunan Nasional Veteran Jakarta

Author Origin : Indonesia

Ferdyanto Ferdyanto, Universitas Pembangunan Nasional Veteran Jakarta

Author Origin : Indonesia

Gumilang Fatwa, Universitas Pembangunan Nasional Veteran Jakarta

Author Origin : Indonesia

Augusta Erlangga, Universitas Pembangunan Nasional Veteran Jakarta

Author Origin : Indonesia

Downloads

Download data is not yet available.

How to Cite

Hardian, M. P. A., Ferdyanto, F., Fatwa, G., & Erlangga, A. (2025). Design And Performance Analysis of a Solar-Powered Boost Converter with Inductor Variations Controlled by Arduino Uno . Jurnal Pendidikan Fisika Dan Teknologi, 11(1), 90–101. https://doi.org/10.29303/jpft.v11i1.7842

Most read articles by the same author(s)