Quality of comply boards from the industrial waste of palm and bamboo
DOI:
10.29303/jbt.v24i2.6961Published:
2024-06-04Downloads
Abstract
Requisite of boards as a material for furniture is increasing. Therefore, alternative materials are needed to replace wooden boards such as comply boards. This study aims to determine the quality of comply board from palm and bamboo waste using PVAc adhesives. The treatment used is 12% and 14% adhesive percentages. Parameter tests of comply board of physical properties include moisture content, density, and thickness development; mechanical properties include modulus of elasticity (MOE) and modulus of rupture (MOR). The mechanical properties of adhesive content have a significant effect on the mechanical properties of comply board palm and bamboo namely MOE and MOR the Physical Properties of the resulting comply board meet SNI 03-2105-2006 standards, namely for the parameters of Water Content, Density, Water Absorption. The mechanical properties of comply boards, namely Modulus of fracture (MoR) are not included in these standards. The condition of the results of this study is thought to be.
Keywords:
Comply board, PVAc, Physical Properties and MechanicsReferences
Baskara, M. I. A., Hapsoro, D., Maulana, M. I., Marwanto, Prasetia, D., Hidayat, W., Lubis, M. A. R., Febrianto, F., & Kim, N. H. (2022). Physical and Mechanical Properties of Oriented Strand Board from Three Species of Plantation Forests at Various Resin Contents. Jurnal Sylva Lestari, 10(1), 49–62. https://doi.org/10.23960/jsl.v10i1.519
Febrianto, F., Sumardi, I., Hidayat, W., & Maulana, S. (2017). Papan Untai Bambu Berarah: Material Unggul untuk Komponen Bahan Bangunan Struktur (1st ed.). IPB Press. http://repository.lppm.unila.ac.id/2083/1/Papan Untai Bambu Berarah-Material Unggul untuk Komponen Bahan Bangunan Struktur.pdf
Indrayanti, L., Siska, G., Sijabat, F., Kehutanan, J., Pertanian, F., Palangka, U., Jalan, R., Sudarso, Y., Nyaho, T., & Raya, P. (2023). Preliminary Test Of Physical Mechanical Properties Of Kawui Wood Particle Board (Vernonia arborea) With Three Percentages PVac (Polyvinyl acetate) Adhesive. Juni, 17(1), 27–36.
Kartika, I. A., & Pratiwi, D. F. (2018). Karakteristik Papan Partikel Dari Bambu Dengan Perekat Getah Damar. Jurnal Teknologi Industri Pertanian, 28(2), 127–139. https://doi.org/10.24961/j.tek.ind.pert.2018.28.2.127
Meliana, M., & Asri, A. (2021). Analisis Pengaruh Ukuran Serat Terhadap Sifat Fisis dan Mekanis Papan Komposit Berbahan Serat Batang Pisang Kepok. Prisma Fisika, 9(3), 221. https://doi.org/10.26418/pf.v9i3.50089
Mirza, H., Mahdie, M. F., Rahmat, G. A., Program, T., & Kehutanan, S. (2020). Sifat Fisik dan Mekanik Papan Partikel Dari Serbuk Gergajian Kayu Sengon Laut (Paraserianthes falcataria) Menggunakan Perekat PVaC. Jurnal Sylva Scienteae, 03(5), 855–867.
Ningsih, R. V., Wulandari, F. T., Latifah, S., & Hidayati, E. (2023). Effect of Adhesive Content on Physical Properties Particleboard Made from Bamboo and Sugar Palm Waste (Arenga Pinnata (Wurmb.) Merr). Jurnal Biologi Tropis, 23(1), 133–139. https://doi.org/10.29303/jbt.v23i1.4449
Rachmi, D. T., & Ignasia, S. (2019). Properties of particleboard made from mixture of jabon wood and andong bamboo. Jurnal Penelitian Hasil Hutan, 37(2), 123–136.
Stark, N. M., Cai, Z., & Carll, C. (2010). Chapter 11 - Wood-Based Composite Materials Panel Products , Glued-Laminated Timber , Structural Materials. Wood Handbook - Wood as an Engineering Material, January 2018, 1–28.
License
Copyright (c) 2024 Rima Vera Ningsih, Dini Lestari, Febriana Tri Wulandari, Niechi Valentino, Fauzan Fahrussiam, Andrie Ridzki Prasetyo
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Biologi Tropis is licensed under a Creative Commons Attribution 4.0 International License.
The copyright of the received article shall be assigned to the author as the owner of the paper. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.
Authors are permitted to disseminate published articles by sharing the link/DOI of the article at the journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from the journal with an acknowledgment of initial publication to this journal.
