The Physical Properties Characteristics of Laminated Board of Jackfruit, Mahogany, and Petung Bamboo
DOI:
10.29303/jbt.v25i1.8383Published:
2025-03-05Downloads
Abstract
Wood laminates offer a luxurious appearance and beautiful ornamental value. Petung bamboo has a very good material to be applied into laminated boards, besides the sturdy stem wall, the bamboo has a long life and is free from pests and diseases. The purpose of this study was to identify the strength class of laminated boards for construction use by analyzing the effect of the combination of jackfruit mahon wood with petung bamboo. The study showed that there was no significant difference in the strength of solid and laminated boards. The mahogany (Swietenia mahagoni L. Jacq.) and jackfruit (Artocarpus heterophyllus Lamk.) woods have medium specific gravity (0.53-0.72 for mahogany and 0.51-0.58 for jackfruit) and strength class II-III, which makes them suitable for laminated boards. The combination significantly impacts density and moisture content, but has no impact on expansion or shrinkage. Each physical examination complies with JAS SE-7 2003. This laminated board combination is classified as strength class III and is suitable for use as a building material.
Keywords:
Jackfruit, mahogany, petung bamboo, laminated board, physical properties.References
Belatrix. (2022). Analisis Sifat Fisika Dan Mekanika Papan Laminasi Kombinasi Bambu Petung Dan Bambu Ater.’, Jurnal Inersia, Vol. 18 No. 1, Hal. 1–8. DOI:10.20527/jss.v6i6.11109
Dian Islamiati. 2021. Sifat Fisika Glulam Dari Potongan Kayu Rajumas (Duabanga Mollucana). Skripsi. Universitas Mataram.
Ginting, A. (2012). Pengaruh Luas Tampang dan Komposisi Lapisan Kayu Terhadap Kekuatan Balok Laminasi. Jurnal Ilmu-Ilmu Teknik Diagonal, 7(1), 73-82
Hanafiah, K. (2012). Rancangan Percobaan. In PT.Raja Grafindo Persada.
Hidayati, F., Isti Tamira Fajrin, Muhammad Rosyid Ridho, Widyanto Dwi Nugroho, Sri Nugroho Marsoem, & M. N. (2016). Sifat Fisika dan Mekanika Kayu Jati Unggul Mega Dan Kayu Jati Konvensional Yang Ditanam Di Hutan Pendidikan Wanagama, Gunungkidul, Yogyakarta. Jurnal Ilmu Kehutanan, 10
https://doi.org/10.22146/jik.16510
Kasmudjo. (2001). Pengantar Teknologi Hasil Hutan Bagian V Papan Tiruan Lain. Yayasan Pembina Fakultas Kehutanan Universitas Gadja Mada.
Lempang, M. (2014) ‘Sifat dasar dan potensi kegunaan kayu jabon merah’, Jurnal Penelitian Kehutanan Wallacea, 3(2), pp. 163–175. DOI:10.18330/jwallacea.2014.vol3iss2pp163-175
Lestari, D., Ningsih, R. V., And Fahrussiam, F. (2023). Anatomical Properties And Quality Of African Wood Fiber As A Raw. 19(2), 1–5.
https://doi.org/10.24259/perennial.v19i2.31192
Megawati, F. ., Usman, & Tavita, G. (2016). Physical and Mechanical Properties of Wood Gerunggang (Cratoxylon arborescen Bl) Densified by Time Steaming and Pressing Time. Journal of Sustainable Forests, 4(2), 163–175. DOI:10.1088/1755-1315/374/1/012060
Mochsin,Fadillah H. Usman & Nurhaida. (2014). Stabilitas Dimensi Kayu Berdasarkan Suhu Pengeringan dan Jenis Kayu. Jurnal Hutan Lestari, 2(2), 229-241.
Prabowo, A., dan H. S. (2013). Analisis Teknis dan Ekonomis Ketebalan Bilah Laminasi Bambu Sebagai Material Lambung Kapal. Jurnal Teknik POMITS, 2(1).
Purwanto, D. (2011). Pembuatan Balok Dan Papan Dari Limbah Industri Kayu. Balai Riset Dan Standardisasi Industri Banjarbaru. Jurnal Riset Industri, 5, 13–20.
Radjali Amin & Wulandari. (2023). Kombinasi Kayu Rajumas dan Bambu Petung Sebagai Produk Papan Laminasi. Emperiscm Journal, 4 (1),1-10. DOI:10.36312/ej.v4i1.1266
Rini, D. S., Swastana, I. W., & Diansyah, A. (2019). Variasi Radial Sifat Fisika Kayu Nangka (Artocarphusheterophyllus) yang Berasal dari Desa Sesaot Kabupaten Lombok Barat. Jurnal Sangkareang Mataram, 5(2), 66-71.
Sari, R. J. P. (2011). Karakteristik Balok Laminasi dari Kayu Sengon (Paraserianthes falcataria (L.)Nielson), Manii (Maesopsis eminii Wild.) dan Akasia (Acacia mangium Engl.). Skripsi. Institute Pertanian Bogor.
Somadona, Sonia, E. S. dan D. E. V. (2020). Karakteristik Balok Laminasi Kayu Akasia (Acacia mangium) dan Meranti Merah (Shorea leprosula) berdasarkan SusunanmLamina dan Berat Labur Perekat Styrofoam. Wahana Forestra Jurnal Kehutanan, 15(2), 53–64. DOI: 10.31849/forestra.v15i2.5039
Supriadi, Achmad, I.M. Sulastiningsih & Subyakto. 2017. Karakteristik Laminasi Bambu Pada Papan Jabon. Jurnal Penelitian Hasil Hutan. 35(4): 263-272. DOI:10.20886/jphh.2017.35.4.263-272
Widiati, Yuli, K., Supraptono, B., & Tripratono, A. B. Y. (2018). Karakteristik Sifat Fisika dan Mekanika Kayu Lamina Kombinasi Jenis Kayu Sengon (Paraserianthes falcataria (L.) Nilsen) dan Jenis Kayu Merbau (Intsia Spp.). Jurnal Hutan Tropis, 2(2), 93–97.
DOI:10.32522/ujht.v2i2.1640
Wulandari F. T., Lestari, D., & Dewi, N. P. E. L. (2023). Analisis Pengaruh Jenis Papan, Berat Labur Perekat Dan Interaksinya Terhadap Sifat Fisika Dan Mekanika Papan Laminasi. Jurnal Daun, 10(1: 97-113. DOI:10.20527/jss.v6i6.11109
Wulandari F.T & Radjali Amin. (2023). The Effect of Felt Pressure and Adhesive Lath Weight on The Physical and Mechanical Properties of The Combination of Petung Bamboo and Sengon Laminated Boards. Jurnal Biologi Tropis, 23(2): 263-271. DOI:10.29303/jbt.v23i2.4735
Wulandari, F. T., Habibi, & Amin, R.(2023). Sifat Fisika dan Mekanika Papan Laminasi Bambu Petung (Dendrocalamus Asper) dengan Susunan Bilah Ke Arah Lebar. Jurnal Hutan Tropika, 18(1), 1–8. DOI:10.36873/jht.v18i1.9027
Wulandari, F. T., Habibi, & Amin, R.(2023). Sifat Fisika dan Mekanika Papan Laminasi Bambu Petung (Dendrocalamus Asper) dengan Susunan Bilah Ke Arah Lebar. Jurnal Hutan Tropika, 18(1): 1–8. DOI:10.36873/jht.v18i1.9027
Wulandari, F.T, Febriana Tri, Amin, R., & Atmaja, I.G. D. (2022). Pengaruh Berat Labur Perekat Terhadap Sifat Fisika dan Mkanika Papan Laminasi Jati Putih (Gmelina Arborea Roxb). Jurnal Media Bina Ilmiah, 16(9), 1–10. https://doi.org/10.33758/mbi.v16i9.1554
Wulandari, Radjali Amin & Dini Lestari. (2024). Analisis kekuatan fisika mekanika papan laminsi kombinasi kayu rajumasbambu petung, sengon bambu petung dan bamboo petung sebagai bahan kontruksi. Jurnal Taman Vokasi. Vol. 12 N0.1 Hal 15-26. https://doi.org/10.20527/jss.v6i6.11109
Wulandari, Rima Vera Ningsih, dan Hasyyati Shabrina. (2024). Pengaruh Berat Labur, Jenis Kombinasi Sertainteraksinya Terhadap Sifat Fisika Mekanika Papan Laminasi Kombinasi Rajumas Bambu Petung Dan Kemiri Bambu Petung. Jurnal Sylva Scienteae Vol. 07 No. 3 Hal 1-10.
Wulandari, T. F. (2021). Pengaruh Berat Labur Perekat Terhadap Sifat Fisika Papan Laminasi Bambu petung (Dendrocalamus Asper (Schult. F.) Backer Ex Heyne). Jurnal Media Bina Ilmiah, 16(3), 1–8.
Yoresta, F. S. 2014. Studi eksperimental perilaku lentur balok glulam kayu pinus (Pinus merkusii). Jurnal Ilmu Teknologi Kayu Tropis. 12(1): 33–38.
License
Copyright (c) 2025 Radjali Amin, Febriana Tri Wulandari
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Biologi Tropis is licensed under a Creative Commons Attribution 4.0 International License.
The copyright of the received article shall be assigned to the author as the owner of the paper. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.
Authors are permitted to disseminate published articles by sharing the link/DOI of the article at the journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from the journal with an acknowledgment of initial publication to this journal.
