Analisis Nilai Hambatan Jenis Aluminium Berdasarkan Panjang Kawat Yang Berbeda

Authors

Elisa Kasli , Via Risna Dewi , Hilda Mazlina

DOI:

10.29303/jpft.v6i1.1455

Published:

2020-06-14

Issue:

Vol. 6 No. 1 (2020): Januari-Juni

Keywords:

Ohm’s Law, Hambatan Jenis, Aluminium

Articles

Downloads

How to Cite

Kasli, E., Dewi, V. R., & Mazlina, H. (2020). Analisis Nilai Hambatan Jenis Aluminium Berdasarkan Panjang Kawat Yang Berbeda. Jurnal Pendidikan Fisika Dan Teknologi, 6(1), 141–145. https://doi.org/10.29303/jpft.v6i1.1455
Crossref
Scopus
Google Scholar
Europe PMC

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

This study aims to determine the value of aluminum specific resistance which is calculated based on Ohm's law. This research uses an experimental method. In this study, 4 experiments were carried out with different lengths of wire. The first experiment used a wire length of 0.05 m, the second experiment used a wire length of 0.1 m, the third experiment used a wire length of 0.15 m, and the fourth experiment used a wire length of 0.2 m. The results of the study showed that the wire length of 0.05 m obtained the value of the type resistance of 2.7 x 10-3 ém, the length of the wire of 0.1 m obtained the value of the type resistance of 2.7 x 10-3 ém, the length wire of 0.15 m obtained type resistance value of 2.7 x 10-3 ém and at a wire length of 0.2 m obtained type resistance value of 2.7 x 10-3 ém. Thus, it can be concluded that the change value of aluminum types will be the same value if the wire material used is also the same value.

References

Edi, I. (2007). Fisika kelas X untuk SMA dan MA. Klaten: PT.intan pariwara.

Fahmi, H. (2015). Analisa Kekerasan dan Fracture Toughness Alumina Diperkuat Serbuk Aluminium dan Tembaga. Jurnal Teknik Mesin (JTM), 5(1).

Kawulur, C. L., Patras, L. S., Tuegeh, M., & Lisi, F. (2013). Aplikasi Perhitungan Biaya Pokok Penyediaan Tenaga Listrik di Sulawesi Utara Sub Sistem Transmisi. Jurnal Teknik Elektro dan Komputer, 2(2).

Rahmatika, A., Ibrahim, S., Hersaputri, M., & Aprilia, E. (2019). Studi pengaruh variasi kuat arus terhadap sifat mekanik hasil Pengelasan GTAW alumunium 1050 dengan filler ER 4043. Jurnal POLIMESIN, 17(1), 47-54.

Roben, D., Bagia, I. N., & Manesi, D. (2017). Studi Tentang Penggunaan Aluminium Foil Sebagai Penghantar Arus Pada Output Koil Sepeda Motor Honda 110cc. Komodo Jurnal Pendidikan Teknik Mesin, 1(2), 119-126.

Sari, K. D., & Pradita, A. P. (2018). Implementasi Model Pembelajaran Discovery Learning Menggunakan Media Spreadsheet Pada Materi Hukum Ohm Untuk Meningkatkan HOTS Pada Peserta Didik. In Prosiding SNPS (Seminar Nasional Pendidikan Sains) (pp. 116-122).

Setiyo, M. (2008). Menjadi Mekanik Spesialis Kelistrikan Sepeda Motor. Bandung: Alfabeta.

Sugiarta, Ida Bagus Ketut. (2011). Kajian Teknis Dan Ekonomis Penggunaan Kabel Tembaga Dibandingkan Dengan Kabel Aluminium Pada System Instalasi Dan Distribusi Kabel Power Di Power House W Hotel Retreat and SpaBali. Jurnal Logic, II(3), 119-126.

Tenda, N., & Tumaliang, H. (2016). Penyusutan Daya Listrik Pada Penyulang Jaringan Transmisi Isimu Marisa. Jurnal Teknik Elektro dan Komputer, 5(1), 75-83.

Wahyudi, W. (2017). Analisis Hasil Belajar Mahasiswa pada Pokok Bahasan Hukum Ohm dan Kirchoff dalam Matakuliah Elektronika Dasar I. Jurnal Pendidikan Fisika dan Teknologi, 1(2), 129-134.

Author Biographies

Elisa Kasli, Program Studi Pendidikan Fisika, Universitas Syiah Kuala

Via Risna Dewi, Program Studi Pendidikan Fisika, Universitas Syiah Kuala

Hilda Mazlina, Program Studi Pendidikan Fisika, Universitas Syiah Kuala

License

Authors who publish with Jurnal Pendidikan Fisika dan Teknologi (JPFT) agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License 4.0 International License (CC-BY-SA License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Jurnal Pendidikan Fisika dan Teknologi (JPFT).
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).