Effect of Adhesive Content on Physical Properties Particleboard Made from Bamboo and Sugar Palm Waste (Arenga Pinnata (Wurmb.) Merr)
DOI:
10.29303/jbt.v23i1.4449Published:
2023-01-11Downloads
Abstract
Currently, need for wood as a raw material for making boards has increased, which has reduced the availability of forest resources. To overcome this problem, industrial waste or other lignocellulosic materials are used to make particle board with the aim of efficient use of wood. Particle board has advantages, namely the use of raw materials can be either wood or non-wood waste. Therefore, particle board processing can overcome the problem of handling wood waste which has not been optimally carried out. This research aimed to analyze the physical properties of particle board made from bamboo and sugar palm waste. This study used an experimental method with a completely randomized design (CRD) with one factor (adhesive content), namely 10%, 12%, and 14%. The results of this study showed that physical properties of bamboo particle board at adhesive content of 10%, 12%, and 14% ranged from, respectively: water content (10.26%, 9.96%, dan 9.79%); density (0.69 gr/cm3, 0.68 gr/cm3, dan 0.71 gr/cm3); thickness swelling (21.57%, 20.07%, dan 19.23%). While the palm sugar particle board with adhesive content of 10%, 12%, and 14% respectively: water content (11.29%, 10.91%, dan 10.22%); density (0.70 gr/cm3, 0.69 gr/cm3, dan 0.71 gr/cm3); thickness swelling (26.00%, 22.90%, dan 22.85%). From the physical properties of the two types of particle board, the water content and density of particle board fulfilled JIS A-2003 standard, while thickness swelling did not fulfilled JIS A-2003 standard. Based on the value of moisture content and density, the use of bamboo particle board and palm sugar is suitable for interior materials.
Keywords:
bamboo; particle board; PVAc; sugar palmReferences
Abdulkareem, S., & Adeniyi, A. (2017). Production of Particle Boards Using Polystyrene and Bamboo Wastes. Nigerian Journal of Technology, 36(3), 788–793. https://doi.org/10.4314/njt.v36i3.18
Aminah, D., Fatriani, F., & Arryati, H. (2020). Sifat Fisik dan Kimia Pelepah Aren (Arenga pinnata Merr) Untuk Bahan Baku Alternatif Pulp dan Kertas. Jurnal Sylva Scienteae, 3(3), 460. https://doi.org/10.20527/jss.v3i3.2179
Arsyad, W. O. M., & Trisatya, D. R. (2020). Pengaruh Kadar Perekat Phenol Formaldehida Terhadap Keawetan Papan Partikel Bambu Andong. Jurnal Penelitian Hasil Hutan, 38(1), 40–45. https://doi.org/10.20886/jphh.2020.38.1.40-45
Astari, L., Prasetiyo, K. W., & Suryanegara, L. (2018). Properties of Particleboard Made from Wood Waste with Various Size. IOP Conference Series: Earth and Environmental Science, 166(1). https://doi.org/10.1088/1755-1315/166/1/012004
Astashin, A. E., Pashkin, M. N., Pudeeva, O. N., Bad’In, M. M., & Fomina, A. I. (2021). Composition, Structure, Spatial Organization and Current Condition of the Urban Forest in a Large City (on the Example of the beyond the River Part of Nizhniy Novgorod, Russia). IOP Conference Series: Earth and Environmental Science, 688(1), 1–9. https://doi.org/10.1088/1755-1315/688/1/012021
Badan Pusat Statistik. (2020). Statistik Produksi Kehutanan. Penelitian Terapan Kajian Strategi Nasional, 1–22.
Chaowana, P. (2013). Bamboo: An Alternative Raw Material for Wood and Wood-Based Composites. Journal of Materials Science Research, 2(2). https://doi.org/10.5539/jmsr.v2n2p90
Ferro, F., Dos Santos, L., Almeida, T., Icimoto, F., & Lahr, F. R. (2016). Performance of OSB with different Preservative treatments to dry wood termites attack. WCTE 2016 - World Conference on Timber Engineering, September.
Japanese Standards Association. (2003). JIS A 5908 Particleboards. Japanese Standards Association. https://www.ptonline.com/articles/how-to-get-better-mfi-results
John G. Haygreen dan Jim L. Bowyer. (1989). Hasil Hutan dan Ilmu Kayu (Gadjah Mada University Press (ed.)).
Kartika, I. A., & Pratiwi, D. F. (2018). Karakteristik Papan Partikel Dari Bambu Dengan Perekat Getah Damar. Jurnal Teknologi Industri Pertanian, 28(2), 127–139. https://doi.org/10.24961/j.tek.ind.pert.2018.28.2.127
Kollmann, F., & Cote, W. A. (1968). Principles of Wood Science and Technology (Vol. 2). Springer-Verlag.
Laemlaksakul, V. (2010). Physical and mechanical properties of particleboard from bamboo waste. World Academy of Science, Engineering and Technology, 40(4), 566–570.
Maloney, T. M. (1977). Modern Particleboard and Dry-Process Fiberboard Manufacturing. In Air pollution Engineering manual: Vol. I.
Mardikanto, T.R., Karlinasari, L., Bahtiar., E.T. (2018). Sifat Mekanis Kayu (IPB Press) (ed.))
Mirza, H., Mahdie, M. F., Rahmat, G. A., Program, T., & Kehutanan, S. (2020). Sifat Fisik dan Mekanik Papan Partikel Dari Serbuk Gergajian Kayu Sengon Laut (Paraserianthes falcataria) Menggunakan Perekat PVaC. Jurnal Sylva Scienteae, 03(5), 855–867.
Muhdi, Risnasari, & Putri, L. A. . (2013). Studi Pembuatan Papan Partikel Dari Limbah Pemanenan Kayu Akasia (Acaciamangium L.). Jurnal Ilmu-Ilmu Hayati Dan Fisika, 15(1), 14–19.
Prasetya, S. R., & Ruhendi, S. (2009). Keteguhan Rekat Internal Papan Partikel Ampas Tebu dengan Swa Adhesi dan Perekat Urea Formaldehida. 30–31.
Rachmi, D. T., & Ignasia, S. (2019). Properties of particleboard made from mixture of jabon wood and andong bamboo. Jurnal Penelitian Hasil Hutan, 37(2), 123–136.
Rowell, R. M. (2012). Moisture properties. In Handbook of Wood Chemistry and Wood Composites, Second Edition (Issue October). https://doi.org/10.1201/b12487
Siska, G., Sarinah, & Bangun, D. L. (2018). Kualitas Papan Partikel Dari Limbah Gergajian Kayu Bangkirai (Shorea laevis Ridl) (Quality. XIII(1), 25–30.
Sonjaya, M. L., Haryanto, I., & Kusnanto. (2013). Pengaruh Kombinasi Lapisan Papan Partikel Dari Limbah Partikel Aren (Arenga pinnata) Dan Limbah Serutan Bambu (Dendrocalamus asper) Dengan Jumlah Perekat Urea Formaldelhida Terhadap Sifat Papan Partikel. ASEAN Journal of Systems Engineering, 1(1), 14–18.
Stark, N. M., Cai, Z., & Carll, C. (2010). Chapter 11 - Wood-Based Composite Materials Panel Products , Glued-Laminated Timber , Structural Materials. Wood Handbook - Wood as an Engineering Material, January 2018, 1–28.
License
Copyright (c) 2023 Rima Vera Ningsih, Febriana Tri Wulandari, Siti Latifah, Eni Hidayati
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Biologi Tropis is licensed under a Creative Commons Attribution 4.0 International License.
The copyright of the received article shall be assigned to the author as the owner of the paper. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.
Authors are permitted to disseminate published articles by sharing the link/DOI of the article at the journal. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from the journal with an acknowledgment of initial publication to this journal.
