Utilization of Diamond Software as a Measuring Tool for Student Scientific Attitude

Authors

Azmi Khusnani , Nursina Sya’bania , Adi Jufriansah , Pujianti Bejahida Donuata , Dian Ahdiany

DOI:

10.29303/jpft.v8i1.3559

Published:

2022-06-11

Issue:

Vol. 8 No. 1 (2022): January-June

Keywords:

Microstructure, Solid Physics, Crystallography, Scientific Attitude, Software Diamond

Articles

Downloads

How to Cite

Khusnani, A., Sya’bania, N., Jufriansah, A., Donuata, P. B., & Ahdiany, D. (2022). Utilization of Diamond Software as a Measuring Tool for Student Scientific Attitude. Jurnal Pendidikan Fisika Dan Teknologi, 8(1), 76–81. https://doi.org/10.29303/jpft.v8i1.3559

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

Solid-state is a compulsory subject in the Physics Education study program. Therefore, the level of complexity—depth—of the material taught is moderate. However, students are facing some obstacles in understanding crystal structure material that is related to microscopic structures. This research aims to apply diamond software media to crystal structure material, from which students' scientific attitudes can be discovered. The method used in this study is the qualitative description. The research subjects totaled 23 students. The data collection technique was carried out by measuring students' scientific attitudes after using the Diamond software. The results showed that the Diamond software could be used in Solid State Physics course. In contrast, the scientific perspective showed good results, which is indicated by the scientific attitude questionnaire score reaching more than 80% within the high category. Meanwhile, student responses indicate that the acceptance rate of Diamond software as a learning medium in Solid State Physics course is 86.25%, or falls into the high category.

References

Agus, J. (2021). Kajian Struktur Kristal Dan Komposisi Atom Bahan Paduan Oksida NdFeO3. SAINFIS: Jurnal Sains Fisika, 1(1), 7-13.

Carolina, H. S., Dewi, A. F., Sari, T. M., & Setiawan, T. A. (2019). Pengembangan Instrumen Penilaian Praktikum Lapangan (Outdoor Practicum) Biologi. Bioma: Jurnal Biologi dan Pembelajaran Biologi, 4(2), 133-141. DOI: https://doi.org/10.32528/bioma.v4i2.3163

Damanik, A. (2020). Pengantar Fisika Zat Padat. Sanata Dharma University Press.

Dewi, L., & Darsinah, D. (2021). Implementasi Pembelajaran IPA Berbasis Konstruktivisme dalam Menumbuhkan Sikap Ilmiah Peserta Didik. E-Jurnal Pendidikan Dan Sains Lentera Arfak, 1(1), 41-46.

Irzaman, I., Epriyanti, R. S., Iskandar, J., Kurniawan, A., & Aminullah, A. (2015, October). Menentukan Perbandingan Jari-Jari Ionik Atom Kecil Dengan Atom Besar (r/R) Dan Sudut Apit (ÆŸ) Pada Struktur Kristal Tetrahedron Dengan Teori Menelaus. In Prosiding Seminar Nasional Fisika (E-JOURNAL) (Vol. 4, pp. SNF2015-VII).

Khery, Y., Indah, D. R., Aini, M., & Nufida, B. A. (2020). Urgensi Pengembangan Pembelajaran Kimia Berbasis Kearifan Lokal dan Kepariwisataan untuk Menumbuhkan Literasi Sains Siswa. Jurnal Kependidikan: Jurnal Hasil Penelitian Dan Kajian Kepustakaan Di Bidang Pendidikan, Pengajaran Dan Pembelajaran, 6(3), 460-474. DOI: https://doi.org/10.33394/jk.v6i3.2718

Negoro, R. A., & Ningtyas, R. I. (2019). Menentukan Nilai Koefisien Gesek Statis Melalui Alat Peraga Gaya Sentripetal untuk Menumbuhkan Sikap Ilmiah Siswa. Risalah Fisika, 3(2), 27-31. DOI: https://doi.org/10.35895/rf.v3i2.135

Parikin, P., Dani, M., Dimyati, A., Purnamasari, N. D., Sugeng, B., Panitra, M., ... & Huang, A. (2021). Effect of Arc Plasma Sintering on the Structural and Microstructural Properties of Fe-Cr-Ni Austenitic Stainless Steels. Makara Journal of Technology, 25(2), 3. DOI: https://doi.org/10.7454/mst.v25i2.3922

Rahmawati, S. Y., Jumaeri, J., & Prasetya, A. T. (2019). Pengaruh Penggunaan Zeolit Alam sebagai Pengikat Impuritas pada Pembuatan Garam. Indonesian Journal of Chemical Science, 8(3), 141-146.

Rositawati, D. N. (2019). Kajian berpikir kritis pada metode inkuiri. In Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya) (Vol. 3, pp. 74-84). DOI: https://doi.org/10.20961/prosidingsnfa.v3i0.28514

Rosyidan, C., Maulani, M., Samura, L., & Ridaliani, O. (2022). Proses Pelapisan Nikel Diatas Al Dengan Metode Elektroplating. Jurnal Teori dan Aplikasi Fisika, 10(1), 121-128. DOI: https://doi.org/10.23960/jtaf.v10i1.2834

Shofiyah, N., & Wulandari, F. E. (2018). Model problem based learning (PBL) dalam melatih scientific reasoning siswa. Jurnal Penelitian Pendidikan IPA, 3(1), 33-38. DOI: https://doi.org/10.26740/jppipa.v3n1.p33-38

Ulfa, S. W. (2018). Mentradisikan Sikap Ilmiah dalam Pembelajaran Biologi. Jurnal Biolokus: Jurnal Penelitian Pendidikan Biologi dan Biologi, 1(1), 1-7. DOI: https://doi.org/10.30821/biolokus.v1i1.314

Yani, M., Mastuang, M., & Misbah, M. (2021). Development of Solid Elasticity Modules with Guided Inquiry Model to Train Critical Thinking Skills. Kasuari: Physics Education Journal (KPEJ), 4(1), 44-56.

Author Biographies

Azmi Khusnani, IKIP Muhammadiyah Maumere

Nursina Sya’bania, IKIP Muhammadiyah Maumere

Adi Jufriansah, IKIP Muhammadiyah Maumere

Pujianti Bejahida Donuata, IKIP Muhammadiyah Maumere

Dian Ahdiany, IKIP Muhammadiyah Maumere

License

Copyright (c) 2022 Azmi Khusnani, Nursina Sya’bania, Adi Jufriansah, Pujianti Bejahida Donuata, Dian Ahdiany

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Jurnal Pendidikan Fisika dan Teknologi (JPFT) agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License 4.0 International License (CC-BY-SA License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Jurnal Pendidikan Fisika dan Teknologi (JPFT).
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Similar Articles

<< < 12 13 14 15 16 17 18 19 20 21 > >> 

You may also start an advanced similarity search for this article.