Pembuatan dan Karakterisasi Sifat Fisis Komposit Multilayer Serat Rami

Authors

Naila Hilmiyana Syifa , Agus Yulianto , Upik Nurbaiti

DOI:

10.29303/jpft.v7i2.2783

Published:

2021-10-23

Issue:

Vol. 7 No. 2 (2021): Juli-Desember

Keywords:

Multilayer Composites, Physical Properties, Ramie Fiber

Articles

Downloads

How to Cite

Syifa, N. H., Yulianto, A., & Nurbaiti, U. (2021). Pembuatan dan Karakterisasi Sifat Fisis Komposit Multilayer Serat Rami. Jurnal Pendidikan Fisika Dan Teknologi, 7(2), 87–95. https://doi.org/10.29303/jpft.v7i2.2783

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

The use of composites as an innovative new material is increasing. Composites are made from two or more materials that have different properties. This research was conducted to make multilayer composites and determine the effect of variations in the number of arrangements and the direction of the fiber angles on the physical properties of composites made from ramie fiber and epoxy. The physical properties of the composites analyzed in this study were density, porosity, water absorption, and thickness expansion. The composites in this study were made using the hand layup method with a volume fraction ratio of 30% and the ratio of epoxy and hardener was 2: 1. Before the composite was made, ramie fibers were soaked in 5% NaOH for 2 hours. This study succeeded in making epoxy ramie multilayer composites with variations in the number of arrangements and the direction of the fiber angles. Variations in the number of layers and the direction angle of the ramie fiber in the composite affect the density and porosity of the composite. Variations in the direction of the ramie fiber in the composite affect the water absorption of the composite. Variations in the number and direction of ramie fiber in the composite did not significantly affect the thickness of the composite.

References

Diharjo, K. (2006). Pengaruh Perlakuan Alkali terhadap Sifat Tarik Bahan Komposit Serat Rami-Polyester. Jurusan Teknik Mesin, 8(1), 8ââ¬â13.

Faruk, O., Bledzki, A. K., Fink, H. P., & Sain, M. (2014). Progress Report on Natural Fiber Reinforced Composites. Macromolecular Materials and Engineering, 299(1), 9ââ¬â26. https://doi.org/10.1002/mame.201300008

Firdaus, A. F., Kencanawati, C., & Priambadi, I. G. N. (2019). Pengaruh Variasi Fraksi Volume Serat Kulit Buah Pinang dengan Getah Pinus sebagai Biocomposite terhadap Kekuatan Tarik dan Porositas. Jurnal Ilmiah Teknik Desain Mekanika, 8(2), 529ââ¬â532.

Izaak, F. D., Fentje, A. R., & Romels, L. (2013). Analisis Sifat Mekanik dan Daya Serap Air Material Komposit Serat Rotan. Jurnal Online Poros Teknik Mesin, 2(2).

Kartika, I. A., & Pratiwi, D. F. (2018). Karakteristik Papan Partikel dari Bambu dengan Perekat Getah Damar. Jurnal Teknologi Industri Pertanian, 28(2), 127ââ¬â137. https://doi.org/10.24961/j.tek.ind.pert.2018.28.2.127

Michael, Surya, E., & Halimatuddahliana. (2013). Daya Serap Air dan Kandungan Serat (Fiber Content) Komposit Poliester Tidak Jenuh (Unsaturated Polyester) Berpengisi Serat Tandan Kosong Sawit dan Selulosa. Jurnal Teknik Kimia USU, 2(3), 17ââ¬â21.

Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015). A Review on Natural Fiber Reinforced Polymer Composite and Its Applications. International Journal of Polymer Science, 1ââ¬â15. https://doi.org/10.1155/2015/243947

Mujiono, Nurhadiyanto, D., & Mukhammad, A. F. H. (2017). Ramie Fiber Reinforced Epoxy (RFRE) Composite for Bulletproof Panels. Journal of Fundamental and Applied Sciences, 9(7S), 228ââ¬â240.

Munasir, M. (2011). Studi Pengaruh Orientasi Serat Fiber Glass Searah dan Dua Arah Single Layer terhadap Kekuatan Tarik Bahan Komposit Polypropylene. Journal of Fundamental and Applied Sciences, 1(1), 33ââ¬â41. https://doi.org/10.26740/jpfa.v1n1.p33-41

Muslim, J., Sari, N. H., & Sulistyowati, E. D. (2013). Analisis Sifat Kekuatan Tarik Dan Kekuatan Bending Komposit Hibryd Serat Lidah Mertua Dan Karung Goni Dengan Filler Abu Sekam Padi 5% Bermatrik Epoxy. Dinamika Teknik Mesin, 3(1), 26ââ¬â33.

Naidu, A. L., Jagadeesh, V., & Bahubalendruni, M. V. A. R. (2017). A Review on Chemical and Mechanical Properties of Natural Fiber Reinforced Polymer Composites. International Journal of Advanced Research in Engineering and Technology (IJARET), 8(1), 56ââ¬â68. https://doi.org/10.23940/ijpe.17.02.p8.189200

Nurwahida. (2019). Uji Sifat Mekanik Papan Komposit dari Campuran Serat Batang Pisang dan Serat Kulit Durian Menggunakan Perekan Polyester. Skripsi Fakultas Sains Dan Teknologi Universitas Islam Negeri Alauddin Makasar.

Nuryati, Amalia, R. R., & Hairiyah, N. (2020). Pembuatan Komposit dari Limbah Plastik Polyethylene Terephthalate (PET) Berbasis Serat Alam Daun Pandan Laut (Pandanus Tectorius). Jurnal Agroindustri, 10(2), 107ââ¬â117.

Perdana, D. G. E., Suarsana, K., & Putri, C. I. (2018). Pengaruh Variasi Komposisi Komposit Matrik Aluminium Berpenguat Sicw / Al2O3 dengan Wetting Agent terhadap Densitas , Porositas dan Kekerasan. Jurnal Ilmiah Teknik Desain Mekanika, 7(1), 7ââ¬â12.

Purwanto, D. (2016). Sifat Fisis dan Mekanis Papan Partikel dari Limbah Campuran Serutan Rotan dan Sebuk Kayu. Jurnal Riset Industri, 10(3), 125ââ¬â133.

Reddy, S., & Mandava, R. (2013). Aero Space Applications of GFRP Composites: Reviewââ¬â¢. International Journal of Mechanical Engineering Research, 3, 10ââ¬â14.

Roihan, A., Hartono, R., & Sucipto, T. (2015). Kualitas Papan Partikel Dari Komposisi Partikel Batang Kelapa Sawit Dan Mahoni Dengan Berbagai Variasi Kadar Perekat Phenol Formaldehida. Peronema Forestry Science Journal, 4(2), 10ââ¬â18.

Silalahi, R., Sinuhaji, P., & Simbolon, T. R. (2013). Pembuatan dan Karakterisasi Komposit Serat Kulit Jagung - Poliester dengan Metode Chopped Strand Mat. Saintia Fisika, 4(1), 1ââ¬â5.

Soemardi, T. P., Kusumaningsih, W., & Irawan, A. P. (2009). Karakteristik Mekanik Komposit Lamina Serat Rami Epoksi Sebagai Bahan Alternatif Soket Prostesis. MAKARA of Technology Series, 13(2), 96ââ¬â101. https://doi.org/10.7454/mst.v13i2.487

Wibowo, H., & Ningsih, T. H. (2018). Pengaruh Variasi Arah Serat pada Susunan Lamina Komposit Serat Glass dengan Matrik Polyester terhadap Sifat Mekanik Hasil Pengujian Bending. Jptm, 7(3), 93ââ¬â99.

Author Biographies

Naila Hilmiyana Syifa, Universitas Negeri Semarang

Naila Hilmiyana Syifa, S.Pd lahir di Kudus, 1 Februari 1994. Gelar sarjana pendidikan diperoleh setelah menempuh pendidikan di Universitas Sebelas Maret Surakarta. Saat ini sedang menempuh pendidikan Magister di Universitas Negeri Semarang.

Agus Yulianto, Universitas Negeri Semarang

Dr. Agus Yulianto,M.Si lahir di Kendal 5 Juli 1966. Gelar sarjana pendidikan diperoleh setelah menempuh program S1 di Fakultas Pendidikan dan Ilmu Pengetahuan Alam IKIP Semarang. Gelar Magister dan Doktor diperoleh setelah menyelesaikan pendidikan di ITB Bandung. Selain basis pendidikan, bidang riset yang ditekuni adalah fisika material, khususnya yang bersifat magnetik.

Upik Nurbaiti, Universitas Negeri Semarang

Dr. Upik Nurbaiti,M.Si lahir di Blora. Gelar sarjanaà diperoleh setelah menempuh pendidika di Universitas Indonesia. Gelar Magisteràdiperoleh setelah menyelesaikan pendidikan di Universitas Gadjah Mada. Gelar Doktor diperoleh setelah menyelesaikan pendidikan di Institut Teknologi Sepuluh Nopember.

License

Authors who publish with Jurnal Pendidikan Fisika dan Teknologi (JPFT) agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License 4.0 International License (CC-BY-SA License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in Jurnal Pendidikan Fisika dan Teknologi (JPFT).
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.